Solvline CS-CAN Command Manual Manuel d'utilisateur télécharger pdf (Page 11)

Configuration commands

Command

CE(eE)<CR>

Description

- The command for transmitting extended CAN frame can be changed.

- If you change to the command that already exists, CS-CAN may not operate

properly. Please be advised before changing commands.

Example

When CS-CAN takes CESV<CR> command,

 SlllLDD... <CR> can be used instead of tlllLDD...<CR>.

 VlllL<CR> can be used instead of TlllL<CR>.

Command

H(R)<CR>

Description

- Check if CAN frame was transmitted successfully by getting reply from RS232.

- After the setting is complete, when transmission of CAN frame is compete,

RS232 takes OK<CR> message.

- R  Response

0: Disable 1: Enable

Example

When CS-CAN takes H1<CR> command, it will send CAN frame and set RS232

to be ready to send OK<CR>.

Command

SV<CR>

Description

- Save all modified configuration

- You must save your settings after modifying.

Example

When CS-CAN takes SV<CR> command, it will save all settings to the Flash

memory.

1 2 ... 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Solvline CS-CAN Command Manual Manuel d'utilisateur Page 11