Solvline CS-CAN Command Manual Manuel d'utilisateur télécharger pdf (Page 9)

Configuration commands

2.3 Configuration commands

Command

--<CR>

Description

- Exit from Configuration mode

- Return Syntax: OK<CR>

Example

When --<CR> is received in Configuration mode, OK<CR> is returned and it will

operate in Active mode.

Command

&F<CR>

Description

- Change all settings to the default settings in CAN converter.

- Settings are applied after the reset is completed.

- Return Syntax: OK<CR>

Example

When CS-CAN takes &F<CR> command, configurations for CAN and RS232

will be reverted to factory default configuration. (Factory default - CAN: 125kbps,

RS232: 9600bps, 8N1)

Command

WC(BS)<CR>

Description

- A command to set the communication environment in CAN.

- B  Baud rate

0: 83kbps 1: 100kbps 2: 125kbps

3: 250kbps 4: 500kbps 5: 1000kbps

- S  CAN Spec.

A: CAN 2.0 A B: CAN 2.0 B

Example

When CS-CAN takes WC2B<CR> command, it will set the CAN Baud rate to

125Kbps and Spec. to CAN 2.0 B.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Pas de commentaire

Solvline CS-CAN Command Manual Manuel d'utilisateur Page 9