Solvline Eddy DK Manuel d'utilisateur télécharger pdf (Page 92)

Eddy DK Programmer Guide

4.4 Application Program Compile

Compile the application program to execute on Eddy after registering the compile environment to the ‚Makefile‛.

4.5 Compiling on Windows

Enter ‚make‛ command through cmd(command prompt) on the folder where ‚Makefile‛ is located. As shown

below, if a compile is successfully completed, execution file named ‚Hello_World‛ would be created. Of course,

as this file was cross-compiled, it can not run on Windows environment. Upload this file to Eddy using a FTP to

execute the file on Eddy, (Files uploaded with FTPs will not permanently saved on Eddy.).

This will be further explained on the next chapter, Chpater 5 Creating Firmware.

4.6 Compiling on Linux

To compile a source file on Linux environment, enter ‚make‛ command on the folder where ‚Makefile‛ is

located. As shown below, if a compile is successfully completed, execution file named Hello_World would be

created. Of course, as this file was cross-compiled, it can not run on Linux environment. Upload this file to Eddy

using a FTP to execute the file on Eddy, (Files uploaded with FTPs will not permanently saved on Eddy.).

This will be further explained on the next chapter, Chpater 5 Creating Firmware.

C:\eddy_DK_2xx[\src/Eddy_APPs> make hello_world

/opt/lemonix/cdt/bin/arm-linux-gcc -O2 -g -Wall -Wno-nonnull -c -o Hello_World.o Hello_World.c

/opt/lemonix/cdt/bin/arm-linux-gcc -L/opt/lemonix/cdt/lib -L/opt/lemonix/cdt/bin Hello_World.o -o

Hello_World

C:\eddy_DK_2xx[\src/Eddy_APPs>

C:\eddy_DK_2xx[\src/Eddy_APPs> ls

Hello_world SB_APIs def.c eddy kt.c pinetd portview.o

tcp_client.c tcp_client tcp_multiplex.o . . .

[shlee@localhost Eddy_APPs]$make hello_world

/opt/lemonix/cdt/bin/arm-linux-gcc -O2 -g -Wall -Wno-nonnull -c -o hello_world.o hello_world.c

/opt/lemonix/cdt/bin/arm-linux-gcc -L/opt/lemonix/cdt/lib -L/opt/lemonix/cdt/bin hello_world.o

…………

[shlee@localhost Eddy_APPs]$ ls

Hello_World* SB_APIs/ def.c* eddy* kt.c pinetd* portview.o

server* tcp_client* tcp_multiplex.o tcps* upgrade* . . .

1 2 ... 87 88 89 90 91 92 93 94 95 96 97 ... 149 150

Pas de commentaire

Solvline Eddy DK Manuel d'utilisateur Page 92