Solvline Eddy DK Manuel d'utilisateur télécharger pdf (Page 98)

Eddy DK Programmer Guide

221 Goodbye.

[shlee@localhost firmware]$

Use Telnet to check ‚eddy-fs-2.x.x.x.bin‛ file is in the /tmp folder.

Use ‚upgrade eddy-fs-2.x.x.x.bin‛ command to update the firmware.

In order for the updated firmware to take effect, you need to reboot the module.

After rebooting you can see the sample program running using Telnet program as shown below.

Execution result of application program only output to the console port of Eddy. The console is a debug port of

Eddy DK board and only execution result of application program is generated.

The result can be seen on a computer screen using a serial emulator program such as hyper-terminal on Windows

by connecting the debug port to PC and setting communication speed to 115K, None, 8, 1.

# pwd

/tmp

# ls eddy-fs-2.x.x.x.bin

eddy-fs-2.x.x.x.bin

# upgrade eddy-fs-2.x.x.x.bin

FileSystem Erase ... 2388341 Bytes

FileSystem Write ... eddy-fs-2.x.x.x.bin, 2388341 Bytes

2388341 (2388341 bytes)

Flash Write OK

Flash Verify OK

…

Eddy login: eddy

Password:

# cd /sbin

# ls

hello_world ifconfig nameif switch_root

com_redirect ifdown pinetd sysctl

…

# ps -ef

PID USER COMMAND

1 root init

2 root [posix_cpu_timer]

3 root [softirq-high/0]

xx root /sbin/hello_world 1

1 2 ... 93 94 95 96 97 98 99 100 101 102 103 ... 149 150

Pas de commentaire

Solvline Eddy DK Manuel d'utilisateur Page 98