Solvline Eddy DK Manuel d'utilisateur télécharger pdf (Page 93)

Eddy DK Programmer Guide

4.7 Compiling with LemonIDE

LemonIDE is an IDE(Integrated Development Environment) based on Eclipse platform and provides an intuitive GUI

interface. LemonIDE can be used in both Windows and Linux environments. Source coding, compile, remote

debugging and creating a firmware image can be all carried out with LemonIDE.

Refer to ‚LemonIDE_User_Guide‛ for detailed information.

4.8 Running Application on Eddy

To run an application on Eddy, there are several methods. First method is to convert an application as a firmware

and loads it into the flash memory area and execute. However, this method is not recommended for developing

phase of application, since it is time consuming task. Second method is to load and execution file of an application

to RAM type file system by using the FTP Server on Eddy DK, and execute it from there. This method is suitable for

developing phase of application; however the application loaded to Eddy will be deleted when the power is

disconnected.

The LemonIDE integrated developing environment provides advanced solution. LemonIDE debugging tool supports

the direct transmission of compiled applications to Eddy. By using this tool, the user can execute and check the

result instantly on site.

If you wish to use LemonIDE, please refer to ‚LemonIDE_User_Guide‛.

4.9 Uploading and Executing on Eddy

Connect to Eddy by using FTP.

ID and password for FTP server are same as the one using with telnet connection.

The example below shows how to upload an example file, ‚hello_world‛, to /tmp folder of Eddy on Linux using

FTP.

When uploading a file, ‚bin‛ command must be entered first for binary mode.

For uploading enter ‚put <file name> on the command line.

On Windows environment, use FTP program of Windows on the Command Prompt.

When the transmission is completed, a user can check the file using Telnet terminal connected Eddy.

The file is executable using ‚chmod‛ command; however the mode has to be switched to executable.

[shlee@localhost Eddy_APPs]$ ftp 192.168.0.223

Name (192.168.0.223:shlee): eddy

331 Please specify the password.

Password:

230 Login successful.

ftp> cd /tmp

ftp> bin

ftp> put hello_world

8914 bytes sent in 0.00027 seconds (3.3e+04 Kbytes/s)

ftp> bye

[shlee@localhost Eddy_APPs]$

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 149 150

Pas de commentaire

Solvline Eddy DK Manuel d'utilisateur Page 93